厦门欣锐仪器仪表有限公司

主营产品: 专业检测仪器仪表供应商!美国博世汽车仪器XP-1A,TIF8800A

 店铺认证信息

厦门欣锐仪器仪表有限公司

  • 资质认证: (已认证)
  • 经营模式:代理商
  • 联 系 人 :刘超
  • 所在地区:福建 厦门
  • 开店时间:2007-09-29

 公司动态

瑞典RaySafe DXR+光野检测尺(直读式光野和射线野光

时间:2020-12-16 11:16:50

瑞典RaySafe DXR+光野检测尺(直读式光野和射线野光野检测尺)


RaySafe DXR+光野检测(直式的指示灯光野和射线野一致性检测的传感器排列经过特殊设计以便适合实时检测拍片机、乳腺机照射野和指示光野一致性的需要。

RaySafe DXR+ 可在低至30千伏的电压下使用,并能给出客观的,可复写的而且能立即读出的结果。

性能特点/参数:

RaySafe DXR+ PCB光野检测(直式的指示灯光野和射线野一致性检测上可见一X射线影像的公制刻度,国际惯用规则建议照射野与指示光野一致性误差应小于SID的2%,而乳腺机则为距检查床边缘±5毫米,传感器的特性给需要调整的地方提供了即时的结果。

技术参数:

检测范围:50mm

分辨率 2.5mm

数字显示偏差值

直读检测尺,无需打印胶片
10 ms 曝光时间

自动打开

自动关闭

电池寿命: 6~8 年电池寿命

产地:瑞典RaySafe公司

新推出的Unfors DXR+X光直接测量尺代表着当今新的光射野校正技术。
       Unfors DXR+的使用非常简便,该测量尺只需曝光即可启动,它具有自动复位和自动关闭功能。在进行曝光之前,无需将光野调成方形。不会因等待胶片显影而浪费时间。
       袖珍型Unfors DXR+能够在管电压低至仅为30 kVp时,提供客观、可复制和直接的读数。“Unfors DXR+光射野*性检测尺能够毫不费力地进行快速检测”.

The RaySafe DXR+, Direct X-ray Ruler, represents the latest in today’s technology for alignment of the light and radiation field. The RaySafe DXR+ is extremely easy to use as it is powered on by simply exposing the meter. Features include auto reset and auto power off. There is no need to adjust the light field to a square phantom before making an exposure. No time is wasted waiting for films to be developed.

The pocket-sized RaySafe DXR+ operates down to 30 kVp and gives an objective, reproducible and immediate read-out.  

  • Fully automatic
  • Radiographic & Mammo
  • Ideal for digital imaging
  • 6 - 8 years battery life

“The DXR is amazing – Before I had multiple steps with shots and film alignment. This is so much faster!”Mike Pool, Field Service Specialist 3

Quick Checks

International regulations recommends that the radiation and light field should be aligned within 2 % of the SID or even ± 5 mm at the chest wall for mammo. The RaySafe DXR+ sensor array has been specially designed to meet the needs of real-time checks of the light and radiation field alignment on radiographic and mammographic X-ray equipment.

The characteristics of the sensors provide an accurate and instantaneous result where adjustment is needed. A metric scale on the RaySafe DXR+ PCB is visible on the X-ray image.

1. Position the RaySafe DXR+

Position the "X-ray"-symbol within the light field. 
Align the yellow center line with the light field edge. 

 

2. Expose and read out

Expose and read any X-ray/light field deviation
in the RaySafe DXR+ display. 



免责声明:厦门欣锐仪器仪表有限公司所提供的公司介绍、红外线测温仪、照度计、噪音仪、风速仪、紫外照度计、红外线测温仪、温度计、温湿度计等相关产品信息均有厦门欣锐仪器仪表有限公司自行负责,商品内容真实性、准确性、合法性由厦门欣锐仪器仪表有限公司完全承担,华强智慧网对此不承担任何保证责任。